Your Cart is Empty

  • KIDS
  • SURF



  • 20% Off Surfboard Accessories Leashes Traction Pads Fins Bags

    Lost Round Nose Fish 1996

    Length: 5'5"
    Width: 19.50"
    Thickness: 2.37"
    Volume: 28.5L
    Fin Setup: Tri-Fin FCS II
    Tech: Poly
    Tail Shape: Swallow

    Lost Round Nose Fish 1996

    Lost Round Nose Fish 1996

    Length: 5'6"
    Width: 19.75"
    Thickness: 2.40"
    Volume: 29.5L
    Fin Setup: 2 + 1 FCS II
    Tech: Poly
    Tail Shape: Swallow

    Lost Round Nose Fish 1996

    Length: 5'7"
    Width: 20"
    Thickness: 2.44"
    Volume: 31L
    Fin Setup: 2 + 1 FCS II
    Tech: Poly
    Tail Shape: Swallow

    Lost Round Nose Fish 1996

    Length: 5'8"
    Width: 20.25"
    Thickness: 2.46
    Volume: 32L
    Fin Setup: Tri-Fin FCS II
    Tech: Poly
    Tail Shape: Swallow

    Lost Round Nose Fish 1996

    Length: 5'9"
    Width: 20.50"
    Thickness: 2.52"
    Volume: 33.50L
    Fin Setup: 2 + 1 FCS II
    Tech: Poly
    Tail Shape: Swallow

    Lost Round Nose Fish 1996

    Lost Round Nose Fish 1996

    Length: 5'11"
    Width: 21"
    Thickness: 2.60"
    Volume: 36.5L
    Fin Setup: Tri-Fin FCS II
    Tech: Poly
    Tail Shape: Swallow

    Lost Round Nose Fish '96 Surfboard - FCS II

    No reviews
    1 item left

    The Lost RNF ’96 (Round Nose Fish 1996) is based with reverence, but not 100% compliance, to the original “fish" we developed for Chris n Cory in the year leading up to the 1997 seminal surf film, 5’5” x 19 1/4”.

    Having shaped multiple variations of “fish” from fall 1994 though 1995, we had created a bit of momentum with the designs. Leading into Winter ’95/’96, we had refined a basic design where we were able fine tune, replicate and re-size the original RNF (by hand) with some consistency. We continued to build small quivers for both Chris Ward and Cory Lopez and sent them everywhere, with Cory taking various versions to each stop on WQS tour. These 1996 Fish were all hand shaped and not the most consistent creations, but they became the basis and the building blocks towards offering the design to people outside our own circle of friends. They were the boards that teenaged Chris n Cory took to the North Shore and essentially made their indelible mark on the surfing universe. The RNF-’96 is based with reverence, but not 100% compliance, to original “fish” we developed for Chris and Cory in the year leading up to the 1997 seminal surf film 5’5” x 19 1/4”. “Cory Lopez re-defined what a modern surfboard can do…or even looks like”- SURFER MAGAZINE. “Riding a 5’5” fish, he (Ward) would flow that wobbly platform into powerful, carving roundhouse cutbacks, looking more like Tom Curren than Curren himself. He'd then finish the turn with a sliding 360 in the whitewash” - SURFER MAGAZINE

    While very few specimens from this era still exist (at least in our possession) and most that do are very thin and imperfect relics of Cory’s boards (we can’t find any of Chris’ from the era, at all) some of the re-creation and execution comes down to doing what looks and feels right...and what will work best. I still have the remains of a 5’10 x 20” x 2-5/8” personal craft. A board I carried to Durban SA, in July of ’96. This was a liberating, small wave, life changing board in my path, not only as a designer, but as a surfer who struggled with the status quo boards of the early to mid 90’s. This board allowed me to surf very small, rip-able waves in and around the Durban Piers for a couple weeks that year. I'd never before had so many people (including other shapers) ask me “what are you riding?” and knew then we were on to something more than just frivolous fish fun. These designs were something the entire surfing world could grab on to and enjoy. I've always felt the key difference between our RNF and the majority of others, from the 90’s and beyond, is the fact that our outline was always more based off of MR inspired, high performance, competitive minded, twin fins of the late 70’s/early 80’s. Relatively pulled in tails, developed through trial and error, for maximum performance and control…not just in small surf, but in all size and shape of waves. Plainly put, most fish since this time were and are more predominately influenced by kneeboards. Inspired from early 70’s style, Lis inspired, wide tail, parallel outline kneeboards that transitioned well to stand up surfing in small waves, but have battled to come near peak performance of modern shortboards ever since.

    Our fish was always about performance, not just a crutch to go fast on in small surf. The RNF-’96 brings the best of both worlds together: Reverence for its early vanguard pedigree, while enlightenedly enhanced with 25 years of fun/pro-formance enlightenment.

    Rocker curves: Remain engrained to the original proven curves.

    Outline curves: Both nose and tail were usually the same width at 12” and remain true, but with more precision, including added curve and width around 6” from the tail. One “secret” about the original’s success was that, unlike most all other “fish” the tail width on ours was closer to that of a typical HP Shortboard. This allows much more control off the tail than typical fish designs.

    Bottom Contours: The classic single concave to double concave, accelerating vee combination are defining design elements and hold true to adherence.

    The Thickness Flow, Deckline, Rails, and Tail Foil: They were all over the map in those rudimentary hand shape days. Each board was different, with most of them having noticeably different curves and thickness from one rail to the other. In re-creating these boards, which one is correct? In the end, I went with gut feeling on what would work best.

    For the sake of better surfboards, we've taken a touch of liberty. Based off the past 25 years of board building, we tried to create a consistent (and dare say better) surfboard, faithfully based off, but not necessarily exacting to the varied RNF of 1996. With diligent testing being done by many of our top team, including Kolohe, Coco, Ian Crane, Crosby Cola and other "guests" (and even pedestrian testing by myself) in the last few months of 2020, we are very confident that the RNF-’96 will perform at and above expectations, as an all-around, rip-able fun machine, for a wide level of surfers.

    The cost of shipping a surfboard depends on the size of the surfboard as well as the destination. Check out our Surfboard Shipping Table below.

    Can I return a Surfboard?

    • The board must have NEVER have been ridden, used, waxed or damaged in any way.
    • Customer is responsible for ALL shipping/custom charges to return/exchange.
    • $50 restocking fee will be charged for all returned surfboards.
    • The board must be returned/exchanged within 10 business days of purchase.
    • We strongly recommend insuring all returned or exchanged orders.
    • We are NOT responsible for any returned board that are damaged/lost in transit.
    • Any damage sustained upon return will be deducted from the refund amount. 

    Does the Surfboard come with fins?

    • Typically not, unless stated in the Product Description that fins are included.

    What is the right Surfboard for me?

    • It depends on things like height, weight and experience level. Check out our Surfboard Volume Calculator to find the right size board for you.

    Can I Custom Order a Surfboard?

    • Yes, we do have direct lines with a lot of the board manufacturers and can submit a custom order. Please fill out our Custom Surfboard Order Form if interested.

    Size Guide

    Size Width Thickness Volume
    4'10 18.13 2.13 21.25
    5'0 180.50 2.18 23.00
    5'1 18.63 2.22 24.00
    5'2 18.75 2.25 25.00
    5'3 19.00 2.30 26.00
    5'4 19.25 2.33 27.25
    5'5 19 1/4 2 1/4 26.50
    5'5 19.50 2.37 28.50
    5'6 19.75 2.40 29.50
    5'7 20.00 2.44 31.00
    5'8 20.25 2.46 32.00
    5'9 20.50 2.52  33.50
    5'10 20.75 2.56 35.00
    5'11 21.00 2.60 36.50
    6'0 21.25 2.64 38.00
    6'1 21.50 2.68 39.50
    6'2 21.75 2.70 41.00
    6'3 22.00 2.75 42.50
    6'4 22.00 2.75 43.50


    No reviews

    About Lost Surfboards

    The Lost Surfboard brand began in 1985 with now legendary shaper Matt Biolos and a bunch of school friends started up 'team lost' that would spend their time between snowboarding at Mt. Baldy, skateboarding in Upland at the Pipeline and surfing Dana Point. Team Lost scribbled their name on books, shirts, tables and eventually, a clothing brand was born. In 1987 Lost Head Shaper Matt Biolos began sanding surfboards fresh out of high school. Adopting the name "Mayhem" (an ode to the second model he shaped). Matt 'Mayhem' Biolos shaped 20 boards his first year. Not too many people were ordering boards from “Mayhem” yet, so to make money he continued to sand surfboards and began to paint designs on them along with a handwritten LOST wherever he could. Surfers like Christian Fletcher and Matt Archbold were getting Biolos paint jobs. Working with some big shaping names in the California scene like Timmy Patterson, Jim Fuller, Terry Senate, and Randy Sleigh and getting plenty of feedback from top surfers, his shaping ability was able to develop and from there grew the Lost Brand into a world wide phenomenon.