Your Cart is Empty

  • KIDS
  • SURF
  • 20% Off Surfboard Accessories Leashes Traction Pads Fins Bags

    Lost Puddle Fish

    Sold out

    Lost Puddle Fish Surfboard - Lib Tech

    Notify me when this product is available:


    *FCS/FCS II Compatible This board's fin boxes are FCS /FCS II compatible ONLY.

    The Puddle Fish is an extreme little speed machine. A fast and fishy spin on the ever popular Puddle Jumper. Distinctly shaped with an inverted swallow tail, set inside a wide square tail, and a speed bleeding release channel exiting the tail. Designed for un-adulterated lateral speed in small surf, the Puddle Fish sprung forth from an extended flat spell this past summer, and the need for something fresh to inspire me to get out there regardless.

    More Info

    Beginning with the Puddle Jumper, and retaining its performance defining rocker and spiral vee under the rear foot, I pushed the wide point slightly forward, widened and squared off the the tail block and really pulled in/straightened out the hip area of the outline between the feet. These changes, combined with reducing the depth of the concave through the center of the board (which straightens and flattens the rail rocker under the front foot), all work together to build more linear speed down the line, across flats and through slop. The inverted swallow and angular corners of the square tail reduces the surface area behind the rear foot, adding bite and control without sacrificing the extreme drive generated by the straight tail outline and rail rocker. The entire design is wrapped up with a speed bleeding "afterburner" release channel, which sits inside the double concave vee panels and is toed in slightly, to run parallel with the rear quad fin placement. The channel then exits at the apex of the inverted swallow. My goal was to design a board that matches the flat line speed of any alternative "fish" design, without the cumbersome, drifty feeling most of these boards possess, and allow full force, small wave, rail surfing with confidence. Also available as a custom without the release channel.

    Sizing Guide
    Size Width Thickness Volume
    5'4 20.25 2.32 28.50
    5'6 20.75 2.40 31.00
    5'8 21.25 2.53 34.50
    5'10 21.75 2.63 38.00
    6'0 22.25 2.75 41.75
    6'2 22.55 2.80 44.25

    The cost of shipping a surfboard depends on the size of the surfboard as well as the destination. Check out our Surfboard Shipping Table below.

    Can I return a Surfboard?

    • The board must have NEVER have been ridden, used, waxed or damaged in any way.
    • Customer is responsible for ALL shipping/custom charges to return/exchange.
    • $50 restocking fee will be charged for all returned surfboards.
    • The board must be returned/exchanged within 10 business days of purchase.
    • We strongly recommend insuring all returned or exchanged orders.
    • We are NOT responsible for any returned board that are damaged/lost in transit.
    • Any damage sustained upon return will be deducted from the refund amount. 

    Does the Surfboard come with fins?

    • Typically not, unless stated in the Product Description that fins are included.

    What is the right Surfboard for me?

    • It depends on things like height, weight and experience level. Check out our Surfboard Volume Calculator to find the right size board for you.

    Can I Custom Order a Surfboard?

    • Yes, we do have direct lines with a lot of the board manufacturers and can submit a custom order. Please fill out our Custom Surfboard Order Form if interested.

    Size Guide

  • Bro Dims      
    Size Width Thickness Volume
    5'6" 19.25" 2.35" 27.25
    5'7" 19.38" 2.38" 28.25
    5'8" 19.50" 2.40" 29.25
    5'9" 19.75" 2.44" 30.50
    5'10" 20.00" 2.50" 32.00
    5'11" 20.25" 2.56" 33.50
    6'0" 20.50" 2.63" 35.50
    6'1" 20.75" 2.63" 36.50
    6'2" 21.00" 2.70" 38.50
    6'3" 21.00" 2.75 39.50
    6'4" 21.25" 2.75" 40.50
    6'5" 21.38" 2.75" 41.50
    6'6" 21.50" 2.85" 43.50
    Pro Dims      
    Size Width Thickness Volume
    5'0" 17.63" 2.07" 20.00
    5'2" 18.00" 2.13" 21.75
    5'3" 18.18 2.18" 22.50
    5'4" 18.32" 2.20" 23.50
    5'5" 18.50" 2.25" 24.75
    5'6" 18.75" 2.25" 25.50
    5'7" 19.00 2.30" 26.75
    5'8" 19.25" 2.32" 28.00
    5'9" 19.38" 2.35" 29.00
    5'10" 19.50" 2.38″ 30.00
    5'11" 19.75" 2.44" 31.50
    6'0" 20.00" 2.50" 33.00
    6'1" 20.13" 2.50" 34.00
    6'2" 20.25" 2.56" 35.50
    6'3" 20.38" 2.60" 36.75
    6'4" 20.50 2.63" 38.00
  • Video

    Customer Reviews

    Based on 1 review Write a review

    About Lost Surfboards

    The Lost Surfboard brand began in 1985 with now legendary shaper Matt Biolos and a bunch of school friends started up 'team lost' that would spend their time between snowboarding at Mt. Baldy, skateboarding in Upland at the Pipeline and surfing Dana Point. Team Lost scribbled their name on books, shirts, tables and eventually, a clothing brand was born. In 1987 Lost Head Shaper Matt Biolos began sanding surfboards fresh out of high school. Adopting the name "Mayhem" (an ode to the second model he shaped). Matt 'Mayhem' Biolos shaped 20 boards his first year. Not too many people were ordering boards from “Mayhem” yet, so to make money he continued to sand surfboards and began to paint designs on them along with a handwritten LOST wherever he could. Surfers like Christian Fletcher and Matt Archbold were getting Biolos paint jobs. Working with some big shaping names in the California scene like Timmy Patterson, Jim Fuller, Terry Senate, and Randy Sleigh and getting plenty of feedback from top surfers, his shaping ability was able to develop and from there grew the Lost Brand into a world wide phenomenon.